Some electrical jobs get planned weeks out. A kitchen remodel needs new circuits before the contractor closes the walls. A detached garage needs power run from the main panel. A homeowner schedules an inspection before putting the house on the market. That kind of work moves at its own pace, and we build the visit around what fits the calendar. We handle both kinds of calls, and Tontitown gets covered either way.
The other kind comes in the same morning. A breaker that will not reset. An outlet that stopped working and the refrigerator is on that circuit. A rental unit where the tenant has no power in half the rooms. Those calls do not wait for a convenient window, and we do not ask them to. We are available every day from 6:00 AM to 9:30 PM, and the scope and the price get settled on the call before anything is scheduled.
Scheduling works around the property, not the other way around. If a rental unit needs wiring work and the tenant has to stay home for access, we confirm what the schedule allows and find a time that does not turn into a disruption. If a small business needs outlet work done without shutting down the floor, we talk through what the job involves and what has to be de-energized before we arrive. The conversation on the call is where that gets sorted.
Some faults need attention before the end of the day. A warm outlet, a burning smell near the panel, a breaker that trips again the moment it is reset, or a loss of power to a section of the house are all situations where waiting creates more risk than the repair itself. We take short-notice calls and assess the urgency on the phone. If the situation is urgent, we confirm what the schedule allows and let you know what is available.
The process is the same either way: one call, a clear description of what is happening, and a price before we book the visit. One call is enough to get the visit booked.
Older homes in a town like Tontitown sometimes carry wiring that has been added to over the years, not always by someone who knew the code at the time. A circuit that was tapped into at the wrong point, a panel that has had breakers added past its rated capacity, or an outlet wired without a ground are all things that turn up when we open a box or pull a cover. None of that is unusual, and none of it requires a drama.
What matters is the difference between something that can be corrected in place and something that has to come out and be redone. A loose connection or an improperly terminated wire can often be fixed without touching the rest of the circuit. Wiring that is undersized for the load it is carrying, or that was run in a way that creates a fault risk, needs to be replaced rather than patched. We explain which situation applies and what the correction involves before any work starts.
Arc-fault and ground-fault protection are two of the most common corrections we make in older wiring. AFCI breakers are required on bedroom circuits in homes built or renovated under current code, and GFCI protection is required in kitchens, bathrooms, garages, and exterior locations. Homes that predate those requirements often lack both. Adding them is straightforward work when the existing wiring is in good condition. When it is not, the correction and the wiring repair happen together. Code-compliant wiring on every job is the baseline, not a premium.
Not every electrical fault originates inside the house. A voltage drop that affects the whole property, lights that dim and brighten on their own without any change in load, or a complete loss of power that the breaker panel cannot explain are all signs that the fault may be on the utility side of the meter. The service entrance and the meter connection are where our work ends and the utility's begins, and sorting out which side the fault is on is part of the diagnostic.
When we come out for a troubleshooting visit, we check the panel, test the circuits, and look at the service entrance. If the evidence points to the utility, we tell you what we found and what to report when you call them. If the fault is on our side, we explain what it is and what the repair involves. Either way, you leave the visit knowing what is happening and what the next step is. We make the fix and leave it tidy.
A detached garage or a workshop shed that needs power is a dedicated circuit job that starts at the main panel. The supply runs underground or overhead to the outbuilding, sized for the load it has to carry, whether that is a few lights and outlets or a full workshop circuit with a subpanel. Electric gate operators need their own circuit and sometimes their own disconnect. We do a load calculation before any of this is roughed in, so the panel has the capacity to handle what is being added.
Outlet and switch installation covers standard replacements, adding outlets where a room is short on receptacles, and upgrading to GFCI or AFCI devices where the code or the situation calls for it. Dimmer switches, smart switches, and outdoor-rated outlets all fall in the same category. Dedicated circuits for ranges, dryers, refrigerators, and other high-draw appliances follow the same process: a load check, a circuit run from the panel, and the right outlet at the end of it.
Outdoor lighting covers more than a fixture swap. Motion sensor lights, security lighting around entry points and parking areas, landscape lighting along walkways, and exterior outlets for seasonal or work use all require circuits that are properly weatherproofed and grounded. Recessed and LED lighting upgrades on the interior side follow the same approach: the fixture is only part of the job. The circuit and the box behind it have to be right for the installation to hold up.
Pricing depends on what the job actually involves. A single outlet replacement is a different conversation from running a new circuit across the house. What moves a quote is the fault itself, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change being made. A panel that is already at capacity before a new circuit is added changes the scope. Wiring that turns out to be in worse condition than the symptom suggested changes it too.
We give you a price on the call after asking enough questions to understand what you are dealing with. If the visit turns up something different from what was described, we stop and explain before continuing. The revised scope and the revised price are confirmed before any additional work is done. A figure before anything starts. Flexible timing. Safe wiring.
Call (479) 565-1995 during our hours, every day from 6:00 AM to 9:30 PM.
Describe what you are seeing, where in the property it is happening, and what changed before the problem appeared. We ask the right questions, give you a price, and confirm the visit once you are ready to move forward. There is no obligation before that conversation happens.
Most electrical work that goes beyond a simple device replacement requires a permit and an inspection. Panel upgrades, new circuit runs, service-entrance work, and whole-home rewiring all fall into that category in most jurisdictions. The permit is filed before the work starts, and the inspection happens after it is complete. We handle the permit side of the job, so you do not have to track down the right office or figure out what the application requires.
What the specific requirements are depends on the jurisdiction, and the rules for a town can differ from the county around it. We confirm what applies at your address before anything is scheduled, so the timing accounts for the permit process rather than running into it after the fact. Local means we care what the neighbors think, and that includes doing the paperwork correctly the first time. A quick read of the services page covers the rest.
We take calls from across Tontitown and the surrounding communities in Washington County. Nearby towns we cover regularly include Elm Springs, Johnson, Cave Springs, and Fayetteville. If you are in the area and want to confirm your address falls within our range, ask on the call and we will tell you directly.
Yes. Common area electrical work, including hallway lighting, shared panel circuits, and exterior outlets serving the building, falls within the scope of what we handle. We coordinate with the property manager or owner to schedule the work with minimal impact on tenants.
Homes that have been added onto or updated piecemeal over the years often have circuits that were tapped in without a load calculation, panels that have run out of space, and outlets that lack proper grounding or GFCI protection. Wiring that has been modified more than once without documentation is also common. A diagnostic visit traces whatever symptom you are seeing back to its source and tells you what the correction involves.
We let you know as soon as it becomes clear that the job will not finish in the planned window. The scope and the revised timeline are discussed before we leave for the day, and the follow-up visit is scheduled before we go.
Children can be in the property, but they should be kept away from the work area, particularly when the panel is open or circuits are being tested. We let you know on the call if any part of the job requires a specific area to be kept clear during the visit.
A loss of power that affects the whole neighborhood is the utility's side of the line. A loss that affects only your property, or only part of it, may be either. A breaker that has tripped, a failed service-entrance connection, or a fault in the wiring between the meter and the panel are all situations we can diagnose and correct. If the evidence points to the utility after we check the panel and the service entrance, we tell you what to report when you contact them.
Temporary power involves a dedicated circuit or a temporary panel connection that feeds the outdoor location for the duration of the event or project. We scope the load and the duration on the call and confirm what the setup involves before it is scheduled.
Yes. Access to the panel and the work area is what the visit requires. A tenant or a property manager can provide that access, and we confirm the arrangement on the call when the visit is booked. We explain what we found and what was done before we leave, so you have a clear record of the work even if you were not present.
A quote changes when the work reveals a condition that was not visible or known at the time of the original scope, such as wiring behind a wall that is in worse condition than expected or a panel issue that only becomes apparent once the cover is removed. We stop and explain the change before proceeding, and you confirm the revised scope before we continue.
Existing solar or battery systems add complexity to panel and circuit work because they introduce a second power source. We need to know about any solar or battery equipment before the visit so we can account for it in the scope. Work near the panel or the service entrance on a property with solar requires additional steps to ensure the system is de-energized safely.
We answer the phone. We show up. We explain what we found and what it costs before any work begins. That is the whole process, and it applies whether the job is a single outlet or a panel upgrade.
Call (479) 565-1995 and get a price on the call. We are available every day from 6:00 AM to 9:30 PM.
Electrical service reaches these neighboring areas too: Johnson, Cave Springs, Fayetteville, Lowell, Siloam Springs. See the whole of our local coverage area.
Below is a plain-language look at the electrical work we handle across Tontitown and Washington County. Each row covers what the service includes, who it fits best, and one practical thing worth knowing before you call. If a row matches what you are dealing with, call for a quote and we will confirm the scope and the price before anything is scheduled.
| Service | Scope of Work | Best For | Worth Knowing |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | 100-to-200-amp service upgrades, Panel replacement and subpanel additions, Load calculations, Service-entrance and meter-side work | Older homes adding appliances, a home office, or an EV charger | A load calculation is part of every upgrade so the new panel is sized for what the property actually needs, not just what it needed when it was built. |
| Dedicated Appliance Circuits | Ranges, dryers, and washers, Refrigerators and dishwashers, Sump pumps and workshop equipment, Panel capacity check before the run | Homes adding high-draw appliances or finishing a basement or garage | Running a high-draw appliance on a shared circuit is one of the most common reasons breakers trip repeatedly. A dedicated circuit removes that problem. |
| Backup Generator Installation | Transfer switch wiring, Generator supply connection, Grounding and bonding, Standby and portable generator hookups | Homeowners and businesses in areas with frequent storm outages | A transfer switch isolates the home from the utility line before the generator runs. Without one, back-feeding the line is a serious hazard. We wire it correctly and confirm the grounding before the system is operated. |
Call (479) 565-1995 to talk through what you are seeing and get a quote before anything is scheduled.
(479) 565-1995